40
5.How to use the function menu (MODE key)
How to input a program
Setting the segment 2
Display after operation and operating procedures
Description
10
Example: Inputting a constant rate
gradient operation
Press the [ENTER]
key.
Press the [ENTER] key.
Settings for the segment 1 are determined
and the mode changes to the segment 2
input mode.
The main display indicates flashhing
（
abbreviation of segment 2
）
which
indicates that the present mode is the
segment 2 input mode.
The sub display indicates the program
number being input in the left most 2 digits
and the number of free segments in the
right most 2 digits.
11
Press the [ENTER]
key.
Press the [ENTER] key.
The sub display indicates
and
prompts input of the ramp time 2.
The main display indicates flashing
.
＊
Gradient operation is carried out for the
segment 2 of this example and you need to
set a value you want. The inputting
procedures are the same as for the
segment 1.
Enter a ramp time, a ramp level, a soak time and the wait function following the same procedures as for
the segment 1.
12
Example: Inputting 1 hour
Se
t with the [▼] or
the [▲] key and
press the [ENTER]
key.
Press the [▼] or the [▲] key to adjust to the
time you want and then press the [ENTER]
key.
Ramp time 2 is determined.
13
Example: Inputting 60
℃
Set with the [▼] or
the [▲] key and
press the [ENTER]
key.
Press the [▼] or the [▲] key to adjust to the
temperature you want and then press the
[ENTER] key.
Ramp level 2 is determined.
14
Example: Inputting 30 minutes
Set with the [▼] or
the [▲] key and
press the [ENTER]
key.
Press the [▼] or the [▲] key to adjust to the
temperature you want and then press the
[ENTER] key.
Soak time 2 is determined.
15
Example: Turning the wait function ON
Set with the [▼] or
the [▲] key and
press the [ENTER]
key.
Press the [▼] or the [▲] key to turn the
wait function [ON] and then press the
[ENTER] key.
The wait function 2 is turned on.
Program number being input
Number of free segments
Ramp time of the segment
2
