Yamaha TT-R90(V), Руководство по эксплуатации для владельца

Страница: 170 / 390

3 - 20
INSP
ADJ
TT-R90E
• Steering ring nut
Steering ring nut adjustment steps:
• Remove the front fender
1
.
• Remove the handlebar and handle crown.
• Loosen the ring nut
2
using the ring nut
wrench
3
.
Ring nut wrench:
YU-1268/90890-01268
• Tighten the ring nut
4
using ring nut
wrench
5
and turn the steering right and
left a few times.
NOTE:
Set the torque wrench to the ring nut wrench
so that they form a right angle.
Ring nut wrench:
YM-33975/90890-01403
T
R
.
.
Ring nut (initial tightening):
38 Nm (3.8 m • kg, 27 ft • lb)
• Loosen the ring nut one turn.
• Retighten the ring nut using the ring nut
wrench.
WARNING
Avoid over-tightening.
T
R
.
.
Ring nut (final tightening):
1 Nm (0.1 m • kg, 0.7 ft • lb)
• Check the steering shaft by turning it lock
to lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
• Install the handle crown
6
, main switch
7
, handlebar
8
, and front fender.
2
3
5
4
8
7
6
STEERING HEAD INSPECTION AND ADJUSTMENT