APRILIA RSV MILLE - PART 3 1999 Скачать руководство пользователя | Manualshive

Страница: 1 / 52

background image

51

use and maintenance RSV mille Sport Production

-!).4%.!.#%

a

WARNING

Risk of fire.
Keep fuel and other flammable sub-
stances away from the electrical com-
ponents.

Before beginning any maintenance op-
eration or any inspection of the vehicle,
stop the engine, extract the key from
the ignition block, wait until the engine
and the exhaust system have cooled
down and if possible lift the vehicle by
means of the proper equipment, on firm
and flat ground.

Before proceeding, make sure that the
room in which you are working is prop-
erly ventilated.

Keep away from the red-hot parts of the
engine and of the exhaust system, in or-
der to avoid burns.
The vehicle is made up of not edible
parts. Never bite, suck, chew or swallow
any part of the vehicle for any reason.

a

CAUTION

If not expressly indicated otherwise, for
the reassembly of the units repeat the
disassembly operations in reverse or-
der.

In case any maintenance operation has
to be carried out, it is advisable to use
latex gloves.

Routine maintenance operations can usu-
ally be carried out by the user, but some-
times the use of specific tools and specific
technical skills may be required.
In case periodic maintenance operations,
assistance or technical advice are needed,
contact an aprilia Official Dealer, who will
ensure you prompt and accurate servicing.

Ask your aprilia Official Dealer to test the
vehicle on the road after a repair or period-
ic maintenance operation.

In any case, personally carry out the “Pre-
liminary checking operations” after any
maintenance operation, see p. 42 (PRE-
LIMINARY CHECKING OPERATIONS).

a

CAUTION

After the first 1000 km (625 mi) and suc-
cessively every 7500 km (4687 mi), the
writing “SERVICE” (1) appears on the
right display.
In this case, perform the operations pre-
scribed in the regular service intervals
chart; in case of use on racetracks, car-
ry out these operations more frequent-
ly, see p. 52 - 53 (REGULAR SERVICE
INTERVALS CHART).

Ing-02.fm Page 51 Thursday, December 16, 1999 5:21 PM

1
2
3
...
»

Содержание RSV MILLE - PART 3 1999





















































Отзывы:

Нет отзывов

Похожие инструкции для RSV MILLE - PART 3 1999

Бренд: MadStad Engineering Страницы: 8

Бренд: Parweld Страницы: 37

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 110

Tenere 700 2021

Бренд: Yamaha Страницы: 112

Tenere 700 2023

Бренд: Yamaha Страницы: 114

Super Tenere ES 2023

Бренд: Yamaha Страницы: 132

Tenere 700 2020

Бренд: Yamaha Страницы: 472

Бренд: Yamaha Страницы: 94

Бренд: R&G Страницы: 9

Бренд: G PLAST Страницы: 4

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 278

Бренд: VESPA Страницы: 317

Бренд: Sealey Страницы: 2

RT125D - PARTS CATALOGUE

Бренд: HYOSUNG Страницы: 73

Бренд: Denali Страницы: 3

Бренд: Beta Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды