APRILIA RSV MILLE - PART 3 1999 Скачать руководство пользователя

Страница: 9 / 52

use and maintenance RSV mille Sport Production

REMOVAL

◆

Lift the fuel tank, see p. 66 (LIFTING
THE FUEL TANK).

◆

Unscrew and remove the seven screws
(1) that fasten the filter case cover (2).

◆

Remove the filter case cover (2).

◆

Extract the air cleaner (3).

CAUTION

Plug the openings with a clean cloth, to
prevent any foreign matters from get-
ting into the suction ducts.

Upon reassembly, before putting back
the filter case cover (2), make sure that
you have not left the cloth or other ob-
jects inside the case.

PARTIAL CLEANING

CAUTION

Do not press or strike the metal net of
the air cleaner (3).
Do not use screwdrivers or alike.

◆

Seize the air cleaner (3) vertically and
strike it more than once on a clean sur-
face.

◆

If necessary, clean the air cleaner (3)
with a compressed air jet (directing it
from the inside towards the outside of
the filter).

◆

Clean the outer part of the air cleaner,
(3) with a cloth.

CHANGING

CAUTION

Do not use filters that have already
been used.

◆

Replace the air cleaner (3) with a new
one of the same type.

◆

Every 7500 km (4687 mi), remove the
plug (4).

◆

Empty its content into a container and
deliver it to a salvage centre.

CAUTION

When cleaning the filtering element,
make sure that there are no tears.

Otherwise, change the filtering element.
Make sure that the filtering element is
positioned correctly, in such a way as
to prevent non-filtered air from entering.

Remember that the untimely wear of the
piston segments and the cylinder may
be caused by a faulty or uncorrectly po-
sitioned filtering element.

Ing-02.fm Page 59 Thursday, December 16, 1999 5:21 PM

Содержание RSV MILLE - PART 3 1999





















































Результаты поиска

Содержание RSV MILLE - PART 3 1999

Отзывы:

Похожие инструкции для RSV MILLE - PART 3 1999

Бренды по названию

Популярные бренды

APRILIA RSV MILLE - PART 3 1999, Руководство пользователя

Результаты поиска

Содержание RSV MILLE - PART 3 1999

Отзывы:

Похожие инструкции для RSV MILLE - PART 3 1999

Бренды по названию

Популярные бренды