87
use and maintenance RSV mille Sport Production
#(!.').'
4(% (%!$,)'(4 "5,"3
Carefully read p. 86 (BULBS).
The headlight contains:
– one parking light bulb (1) (upper);
– two high beam bulbs (2) (side);
– one low beam bulb (3) (lower).
To change the bulbs, proceed as fol-
lows:
NOTE
The removal of the front part of
the fairing is necessary when the parking li-
ght bulb and the high beam bulbs must be
changed.
PARKING LIGHT BULB
◆
Remove the front part of the fairing, see
p. 69 (REMOVING THE FRONT PART
OF THE FAIRING).
a
CAUTION
To extract the bulb socket, do not pull
the electric wires.
◆
Grasp the parking light bulb socket (4),
pull it and remove it from its seat.
◆
Withdraw the bulb (1) and replace it with
one of the same type.
HIGH BEAM BULBS
◆
Remove the front part of the fairing, see
p. 69 (REMOVING THE FRONT PART
OF THE FAIRING).
◆
Move the protection element (5) of the
bulb to be changed with your hands.
◆
Withdraw the electric terminal (6).
◆
Release the check spring (7) positioned
at the rear of the bulb socket (8).
◆
Extract the bulb (2) from its seat and re-
place it with a new one of the same type.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.
Ing-02.fm Page 87 Thursday, December 16, 1999 5:21 PM
