Yamaha TT-R90(V), Руководство по эксплуатации для владельца, Страница: 218 / 390

4 - 12
ENG
CYLINDER HEAD
CAUTION:
.
Do not turn the crankshaft during instal-
lation of the camshaft. Damage or
improper valve timing will result.
• Remove the safety wire from the timing
chain.
4. Install:
• Washer
• Bolt
1
NOTE:
Install the bolt
1
while holding the rotor nut
with a wrench.
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
5. Install:
• Timing chain tensioner
6. Check:
• Rotor “I” mark
Align with the crankcase stationary
pointer.
• Valve clearance
Out of specification
→
Adjust.
Refer to the “VALVE CLEARANCE
ADJUSTMENT” section in CHAPTER 3.
Installation steps:
• Remove the tensioner cap bolt
1
and
spring
2
.
• Release the timing chain tensioner one-
way cam
3
and push the tensioner rod
4
all the way in.
• Install the tensioner with a new gasket
5
onto the cylinder.
T
R
.
.
Timing chain tensioner bolt:
10 Nm (1.0 m • kg, 7.2 ft • lb)
• Install the spring
2
and cap bolt
1
.
• Tighten the bolt (with gasket) to the speci-
fied torque.
T
R
.
.
Cap bolt:
8 Nm (0.8 m • kg, 5.8 ft • lb)