Yamaha TT-R90(V), Руководство по эксплуатации для владельца

Страница: 160 / 390

3 - 15
INSP
ADJ
FRONT FORK INSPECTION
3. Adjust:
• Drive chain slack
Drive chain slack adjustment steps:
• Loosen the wheel axle nut
1
and locknuts
2
.
• Adjust chain slack by turning the adjusters
3
.
To tighten
→
Turn adjuster
3
clockwise.
To loosen
→
Turn adjuster
3
counter-
clockwise and push wheel forward.
• Turn each adjuster exactly the same
amount to maintain correct axle alignment.
(There are marks
a
on each side of chain
puller alignment.)
NOTE:
Turn the adjuster so that the chain is in line
with the sprocket, as viewed from the rear.
CAUTION:
Too small chain slack will overload the
engine and other vital parts; keep the
slack within the specified limits.
• Tighten the wheel axle nut while pushing
down the drive chain.
T
R
.
.
Axle nut:
60 Nm (6.0 m • kg, 43 ft • lb)
• Tighten the locknuts.
T
R
.
.
Locknut:
7 Nm (0.7 m • kg, 5.1 ft • lb)
1
3
a
2
EC36C000
FRONT FORK INSPECTION
1. Inspect:
• Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage
→
Repair or
replace.