Xo FLEX, Инструкция по эксплуатации, Страница: 91 / 95

XO FLEX – Instructions for use
Dimensions
and technical data
91
Part Specification
Irrigation 10 – 90 ml/min + 20%
XO ODONTOCURE
Light source LED
Wave lengths 385 – 515 nm (peaks at 400 nm ±10 nm and at 460 ± 3
nm)
Power output – Normal mode 1650 mW/cm
2
Power output – Soft Start 375 mW/cm 2
Fiber glass rod outer diameter 8 mm
Cross-sectional area of optics (effective) 0,44 cm 2 (44,2 mm 2 )
Hand piece temperature during use 46°C
Curing activator classification Class 2, Type 1
Patient chair
Maximum load 150 kg
Drive motors for chair and backrest 25 seconds ON – 400 seconds OFF
Operating light
Light intensity 3,000 – 30,000 lux
Color rendering index (CRI) > 95
Color temperature 5,500 K
Illuminance pattern
In accordance with
ISO 9680 - see Figure 92 below
Suction
The unit shall be connected to a suction machine
with High flow rate
Type of suction Wet or dry
Inner diameter of high volume suction nozzle 16 mm
Inner diameter of saliva suction nozzle 7 mm
Head loss between the suction installation and
the atmospheric end of the high-volume suction
cannula Flow [l/min] Head loss [mbar]
250 33,9
300 59,3
350 84,7
450 110,1
Head loss between the suction installation and
the atmospheric end of the saliva suction cannula Flow [l/min] Head Loss [mbar]
250 33,9
300 42,3
350 67,7
450 84,7
Mesh size suction filters < 1 mm
Weighted noise level from the suction system
through the connected cannulas at a distance of
0.5 m from the cannula connect <65 dB (A)
Water and air supply
Mesh size air filter 5 µ m
Mesh size water filter
50
µ
m
Maximum inlet water conductivity 850 µS/m
Water disinfection (XO Water Clean)
Continuously dispersion of a solution of non-
toxic disinfectant to the procedural water. 0.0235% hydrogen peroxide
Water heater
Maximum power loading 55 W