Xo FLEX Скачать руководство пользователя страница 73

Страница: 73 / 95

XO FLEX – Instructions for use

Unit

messages and remedial actions

7.2

SERVICE MESSAGES AND REMEDIAL ACTIONS

Below you see an overview of the service messages that may appear on the instrument bridge
display.

Table 9 – Service messages

Service message

Reason for message

Remedial action

CHECK YELLOW BOTTLE

The unit will soon run out of XO
Suction Disinfection.

Make sure you have XO Suction
Disinfection cartridges (AN-354)
in stock.

CHECK WHITE BOTTLE

The unit will soon run out of XO
Water Clean

Make sure you have XO Water
Clean cartridges (AO-980) in
stock.

FLUSH MM MIN

Water lines are being flushed. MM
= remaining minutes to completion
of process.

Please wait – do not shut off
power or activate any buttons.

FLUSH OK

Water line flushing completed.
Unit operational again.

NEXT SERVICE
YYYY-MM-DD

Less than 30 days to next
preventive service and safety
inspection.

Call your XO authorized service
provider and require a preventive
service and safety inspection.

SERVICE OVERDUE
YYYY-MM-DD

Date for preventive service and
safety inspection is overdue.

Call your XO authorized service
provider and require a preventive
service and safety inspection.

SUCTION OK

Suction disinfection process
completed. Unit operational again.

SUCTION X %

The suction disinfection process is
ongoing. X = remaining time in %.

Please wait – do not shut off
power or activate any buttons.

WATER CLEAN ACTIVE
WAIT MM

Water tank discharging water. MM
= remaining minutes to completion
of process.

Please wait – do not shut off
power or activate any buttons.

PUMP NOT READY

Pump detached or no connection
to unit.

Attach pump correctly.

NO PUMP

Pump not connected to the
selected suspension/instrument

Attach pump correctly. Check
configuration of the pump.

TOO HOT

If XO ODONTOCURE is activated
continuously the message “TOO
HOT” is displayed and the
instrument is turned off.

Depending on the temperature,
the light is ready for re-activation
after a few seconds.

Содержание FLEX
































































































Результаты поиска

Содержание FLEX

Отзывы:

Xo FLEX, Инструкция по эксплуатации, Страница: 73 / 95

Результаты поиска

Содержание FLEX

Отзывы: