Xo FLEX, Инструкция по эксплуатации, Страница: 75 / 95

XO FLEX – Instructions for use
Preventive
service, safety inspections and
repairs
75
When the preventive service and safety inspection has been performed the XO authorized service
provider will set the date for the next preventive service and safety inspection.
8.3 ADJUSTMENT OF THE ARM SYSTEMS
All arm joints are fitted with roller bearings, adjustable tension springs and friction brakes for
smooth and effortless operation.
The instrument bridge, the operating light and the HD display should be in balance
and easy to maneuver with “two fingers”. If this is not the case – please contact your
XO authorized service provider for adjustment of arm brakes and balance springs.
Please note that the brake and the balance spring of the instrument bridge arm
system should be adjusted by an XO authorized service provider in accordance with
the load on the norm tray fitted under the instrument bridge.
Adjustments of arm systems must be done by qualified personnel only!
Maladjustment may result in a mechanical hazard!
8.4 ADJUSTMENT OF BALANCED INSTRUMENT SUSPENSION ARMS
Each instrument suspension is fitted with a spring that can be adjusted so that the instrument is
perfectly in balance.
All instruments should be in perfect balance when lifted forward – i.e. you should feel
no dragging from the instrument hose when holding an instrument!
If this is not the case – please contact your XO authorized service provider for
adjustment.
8.5 REPLACEMENT OF OPERATING LIGHT SOURCE
The expected lifetime of the LED light source is 10 years.
For replacement of the LED light source please contact your XO authorized service provider.
8.6 XO HD DISPLAY
XO HD Display does not contain any field-serviceable parts. A faulty display must be returned to
XO CARE for repair. Contact your XO authorized service provider.