Xerox WorkCentre 450c/450cp Service Manual
Page 1-7
Pressing buttons has no effect.
Go to Keyboard RAP 7.1.
Fax test print 82P151 to a known,
The following message appears
on the LCD:
Dial number, COPY or
press START to store
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
good fax machine, through a
known, good telephone line.
The document feeds part
way through the scanner
and stops.
Place document in the ADF.
If LCD blank, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
System Check: Send Fax Test
Press START. The following
Dial the remaining digits of the
remote fax. machine. The
Start=send,Enter=add
xxxxxxx
<-- remote #
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
message displays on the LCD:
Preparing to send to
xxxxxxx
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
following displays on the LCD:
Scanner motor does not
activate or document feeds
incorrectly. Go to Doc and Read
Point Sensor RAP 5.1.
Continued on following page
Dial the first digit of the remote
Fax number. LCD displays:
Use START to send
1
<-- number you pressed
NO
YES
www.printcopy.info
www.printcopy.info
