Page 1-8
Xerox WorkCentre 450c/450cp Service Manual
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
The following (or similar)
displays on the LCD:
Sending 01/01
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
xxx-xxxx xx% free
The following displays on the
LCD:
Sending 01/01
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
Completed
The machine dials the remote
fax. Tones or pulse dials are
audible. The transmit LED is
lit, and the following displays
Connecting...
xxx-xxxx
If tones or pulse dials are not
audible, go to Analog
Communications RAP 6.1. If the
on the LCD:
transmit LED is not lit, go to the
The document feeds all the
way through the scanner. The
Go to Doc and Read Point
scanner motor stops after the
document ejects.
The following (or similar)
displays on the LCD:
Load page face down
10:45 am 100: free
The fax was received by the
remote machine.
If no message appears on the
LCD, go to LCD RAP 7.2.
If any other message displays,
go to the Messages RAP 1.1.
Go to Analog Communications
System Check: Send Fax Test (continued)
followed by:
Dialing...
xxx-xxxx
Perform System Check Receive Fax
Test on the following page.
NO
YES
LED RAP 7.3
RAP 6.1
Sensor RAP 5.1.
www.printcopy.info
www.printcopy.info
