Xerox Document WorkCentre 450c, Руководство по обслуживанию

Страница: 129 / 188

Xerox WorkCentre 450c/450cp Service Manual Page 6-1
6. General Procedures and Information
Section Contents
Introduction ...................................... 6-1
Electro Static Discharge .................... 6-1
WorkCentre 450c/450cp Test Print .... 6-2
Xerox Test Print 82P151 ................... 6-3
Firmware Updates ............................. 6-4
Service Menu Map ............................ 6-5
Service Mode .................................... 6-6
Soft Switch Setup ............................. 6-7
Soft Switch Tables ............................ 6-8
WorkCentre 450cp Specifications ... 6-42
Required Tools ............................... 6-44
Tag Matrix ...................................... 6-44
Introduction
The following information is a description
of the information contained in this section.
General Procedures includes a Service Menu
map, all unique service operations and the
machine soft switch parameters and defaults.
When you suspect a machine is functioning
outside the range of its specifications, refer to
product specifications. If the problem is a result
of space, electrical, or environmental problems,
call for management or sales assistance as needed.
Special Tools and Consumables contains a listing
of the required tools and supplies needed to correctly
repair and maintain the machine.
Electro Static Discharge
Certain components in this product are susceptible to damage
from electrostatic discharge. Observe all ESD procedures to
avoid component damage.
www.printcopy.info
www.printcopy.info