DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-26
XEROX DOCUPRINT IPS MESSAGES GUIDE
H132
No process control convergence after power up.
The charge current is no longer within the system tolerance level.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
H133
Light patches; however, toner bottle sensor indicates presence
of toner in bottle/hopper.
Although the dry ink bottle is full, the process control patch used to
control the dry ink dispenser was checked six times and returned as
white each time.
Action
Turn the power to the system off and back on. If the error persists,
contact your service representative.
H138
Failure to detect a transition of waste or reclaim auger in 3
seconds.
The system is unable to detect waste transition or to reclaim auger in
a three second time period.
Action
No action is required. If the error persists, contact your service
representative.
H304
Cleaner air pressure indicates blockage.
Indicates that the system air pressure, required for proper cleaning
and other functions, is below proper operating range.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
H306
Black developer waste tube blocked.
The tube to the black developer waste container is clogged with
waste.
Action
Replace the waste container. (Refer to Guide to Performing Routine
Maintenance for the procedure.) If the error persists, contact your
service representative to clear the tube.
H307
Color developer waste tube blocked.
The tube to the color developer waste container is clogged with
waste.
Action
Replace the developer waste container. If the error persists, contact
your service representative.
H311
Black developer housing fault.
Indicates that a catastrophic black developer housing fault has been
detected during run time.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
