DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-18
XEROX DOCUPRINT IPS MESSAGES GUIDE
F158
Stacker jam, late departure from stacker entry sensor or
Dynamic Stray Check fault.
The paper did not leave the stacker entry in time, causing a jam.
Action
Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. If the error persists, contact your service
representative. (Refer to the
Xerox DocuPrint 4850/4890
or
92C IPS
Troubleshooting Guide
for the procedure.)
F159
Stacker front door open.
The front door of the stacker module is open.
Action
Close the front door of the stacker, discard any purged output and
press the [Continue] button.
F160
Stacker top cover open.
The top cover of the stacker module is open.
Action
Close the top cover of the stacker, discard any purged output, and
press the [Continue] button.
F161
Stacker jam, late arrival at bin 1 sensor.
The paper did not arrive at stacker bin 1 in time, causing a jam.
Action
Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C
IPS Troubleshooting Guide
for the procedure.)
F162
Stacker jam, late departure from bin 1 sensor.
The paper did not leave stacker bin 1 in time, causing a jam.
Action
Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C
IPS Troubleshooting Guide
for the procedure.)
F163
Stacker jam, late arrival at bin 2 sensor.
The paper did not arrive at stacker bin 2 in time, causing a jam.
Action
Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C
IPS Troubleshooting Guide
for the procedure.)
