DOCUPRINT 96/4635/180 IPS MESSAGES
2-16
XEROX DOCUPRINT IPS MESSAGES GUIDE
03-482
EDN unexpected stacker signal.
The job manager received an unexpected delivery signal and
initiated a cycle down of the printer.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-483
Stacker delivery route.
The job manager detected a request for an output delivery schedule
segment initiated by PHN or FSN 1, and initiated a cycle down of the
printer.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-485
JG print response late or printer late.
The job manager detected a PSP print response that was late or
never received and initiated a cycle down of the printer.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-492
MIN main drive enable time-out.
The MIN Core board did not receive a main drive enable from the
PHN Core board within 30 seconds after start was initiated.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
04-201
Machine clock missing at cycle up.
The machine clock could not be detected at cycle up. The control
logic senses a main drive acceleration error.
Action
Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
04-202
MIN declared too many machine clocks.
Too many machine clocks were detected. The control logic senses a
main drive acceleration error.
Action
Clear areas 4, 5, 6, and 7. (Refer to the
Xerox DocuPrint 96/4635/180
IPS Troubleshooting Guide
for the procedure.)
04-203
MIN declared too few machine clocks.
Too few machine clocks were detected. The control logic senses a
main drive acceleration error.
Action
Clear areas 4, 5, 6, and 7. (Refer to the
Xerox DocuPrint 96/4635/180
IPS Troubleshooting Guide
for the procedure.)
