DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-11
E248
Transfer blade paper size fault.
The paper size that was selected for the job, or that is available in the
paper tray, is incorrect.
Action
Install or select a larger paper size.
E250
Transfer blade solenoid failed to engage.
The transfer blade solenoid did not engage during initialization.
Action
Press the [Continue] button. Check the printed output for print quality.
E251
Transfer blade solenoid failed to disengage.
The transfer blade solenoid did not disengage during initialization.
Action
Press the [Continue] button. Check the printed output for print quality.
E278
Toner waste container access door (rear door) open.
The access door to the dry ink waste container is open.
Action
Close the access door to the dry ink waste container at the back of
the printer, and retry the operation. (Refer to the
Xerox DocuPrint
4850/4890
or
92C IPS Guide to Performing Routine Maintenance
for
the procedure.)
E279
Color developer housing is not present.
The system cannot locate the color developer housing. Highlight
color printing is not available.
Action
Verify that the color developer housing unit is installed and seated
correctly and retry the operation. (Refer to the
Xerox DocuPrint 4850/
4890
or
92C IPS Guide to Performing Routine Maintenance
for the
procedure.)
E280
Incorrect developer housing present.
Type of developer housing does not match printer type.
Action
Inspect the gear cover on the rear of the developer housing.
E305
Replace developer waste container (full or not present).
The developer waste container is full or is not installed.
Action
Check that the developer waste container is installed. If the
developer waste container is full, replace it, making sure the new
developer waste container is installed correctly. (Refer to the
Xerox
DocuPrint 4850/4890
or
92C IPS Guide to Performing Routine
Maintenance
for the procedure)
