DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-32
XEROX DOCUPRINT IPS MESSAGES GUIDE
J147
MIR self test output failure.
The MIR board failed, an off-board problem occurred in a PHR output
device or signal line, or a loss of +24 voltage occurred.
Action
No action is required. If the error persists, contact your service
representative.
J148
XER self test output failure.
The output created by the XER self test is not acceptable.
Action
No action is required. If the error persists, contact your service
representative.
J149
XER self test A/D failure.
The XER board failed, an off-board problem occurred that affected
the analog outputs, or a loss of supply voltage occurred.
Action
No action is required. If the error persists, contact your service
representative.
J155
BFR self test input failure.
The BFR board failed.
Action
No action is required. If the error persists, contact your service
representative.
J156
BFR self test output failure.
The BFR board failed.
Action
No action is required. If the error persists, contact your service
representative.
J165
Stacker cover opened in print.
The top cover of the stacker module is open.
Action
Close the top cover of the stacker, discard any purged output, and
press the [Continue] button.
J169
FOR self test input failure.
The FOR board failed.
Action
No action is required. If the error persists, contact your service
representative.
J170
FOR self test output failure.
The FOR board failed.
Action
No action is required. If the error persists, contact your service
representative.
