DOCUPRINT 96/4635/180 IPS MESSAGES
2-42
XEROX DOCUPRINT IPS MESSAGES GUIDE
09-353
Fail to converge charge in DC951.
The contrast potentials did not converge during DC951 setup.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
09-354
Fail to set toner content in DC951.
The dry ink concentration was not set during DC951 setup.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
09-355
Failure to set patch gen in DC951.
The patch generator was not set during DC951 setup.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
09-360
Fail to complete amcal setup DC951.
The amcal was not set during DC951 setup.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
09-361
Amcal out of range in DC951.
The amcal was out of range during DC951 setup.
Action
Press the [Reset] button behind the printer control console front pull-
down cover.
10-101
L E late at prefuser XPORT Q1009.
The sheet of paper did not arrive at the prefuser sensor in time,
causing a jam.
Action
Open the printer right front door, clear areas 4 and 5, close the door,
and retry the operation. (Refer to the
Xerox DocuPrint 96/4635/180
IPS Troubleshooting Guide
for the procedure.)
10-102
L E late to post fuser sensor Q1010.
The sheet of paper did not arrive at the fuser sensor in time, causing
a jam.
Action
Open the printer right front door, clear areas 4 and 5, close the door,
and retry the operation. (Refer to the
Xerox DocuPrint 96/4635/180
IPS Troubleshooting Guide
for the procedure.)
