DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-30
XEROX DOCUPRINT IPS MESSAGES GUIDE
H353
Electrostatic set-points out of range, possible massive cleaning
problem.
The electrostatic set points are out of the acceptable range (the black
bias target voltage is greater than 1000VDC).
Action
Press the [Continue] button. If the error persists, contact your service
representative.
H355
Convergence timeout (black toner patch).
A black patch voltage convergence error occurred.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
H356
Convergence timeout (color toner patch).
A color patch voltage convergence error occurred.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
J021
ADIO self test analog failure.
The ADIO self test failed and was unable to continue.
Action
No action is required. If the error persists, contact your service
representative.
J023
ADIO self test input failure.
The ADIO board failed or an input signal line is shorted to the ground.
Action
No action is required. If the error persists, contact your service
representative.
J024
ADIO self test output failure.
The ADIO board failed, an off-board problem occurred in an output
device or signal line, or a loss of +24 voltage occurred.
Action
No action is required. If the error persists, contact your service
representative.
J025
HCFR self test input failure.
The HCRF board failed or an input signal line is shorted to the
ground.
Action
No action is required. If the error persists, contact your service
representative.