DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
3-22
XEROX DOCUPRINT IPS MESSAGES GUIDE
F239
Bypass Transport to Finishing device docking fault.
Indicates a jam.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
F240
Set separator sensor or solenoid failure (F4050)/ DFA delivery
sequence jam (F4850).
Indicates a jam.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
F242
DFA sheet jam.
Indicates a jam.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
F259
XAN lost machine clocks.
There is a CPM, MIR, or XER board failure. There may also be a
harness problem between the CPM and MIR, or the MIR and XER.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
F260
XAN lost pitch reset.
There is a CPM, MIR, or XER board failure.
Action
Obtain and discard any purged output and press the [Continue]
button. If the error persists, contact your service representative.
F268
Black developer bias voltage out of range.
The monitor voltage for the black developer bias is less than the
control voltage. This error is logged by the system.
Action
No action required.
F269
Chopped black DC bias voltage failure.
A DC failure occurred.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
F270
Color developer bias voltage out of range.
Indicates that the color developer bias voltage is out of range.
Action
Press the [Continue] button. If the error persists, contact your service
representative.
