DOCUPRINT 96/4635/180 IPS MESSAGES
2-46
XEROX DOCUPRINT IPS MESSAGES GUIDE
10-215
Fuser brake failed while camming out.
The camming motor did not stop during printing.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
10-216
Fuser cam motor fault.
The camming motor did not start during printing.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
10-217
Fuser cam in sensor failed.
The Cam-In sensor was unblocked during initialization. This error is
logged by the system.
Action
No action is required.
10-218
Fuser cam out sensor failed.
The Cam-Out sensor was unblocked during initialization. This error
is logged by the system.
Action
No action is required.
10-219
Fuser cam motor brake fault.
The camming motor did not stop during initialization.
Action
Press the [Reset] button located behind the printer control console
front pull-down cover.
11-100
Sheet early inverter entrance Q1155.
The sheet of paper arrived at the inverter entrance sensor early,
causing a jam.
Action
Obtain and discard any purged output and press the [Clear] button
behind the printer control console pull-down front cover.
11-102
L E jam at inverter entrance Q1155.
The leading edge of the sheet of paper did not arrive at the inverter
entrance sensor in time, causing a jam.
Action
Open the top cover of the printer and clear area 8. Open the front
door of the inverter and clear area 15. Retry the operation. (Refer to
the
Xerox DocuPrint 96/4635/180 IPS Troubleshooting Guide
for the
procedure.)
