Resource
170
XBLUE Networks
Option P
ort Function—
SL
T/Door Phone
6.4
Option
Port
Function—SLT/Door
Phone
MBC - 4-28
Note:
At default, extensions 36 and 37, are assigned as single line telephones that rings, so once
a door phone is connected it will automatically answer the inbound call.
There are two
dual
use ports on the Option Board. These two ports can be set for use as a
Door Phone interface or a Single Line Telephone (SLT) extension interface (analog port).
They cannot be used as both at the same time. When set as SLT extensions, they will oper-
ate as a standard analog line telephone for use with fax machines and modems, etc. When
set to Door Phone, they will integrate with the systems’ proprietary Door Phone. The pro-
gramming parameters for the two Option Port Functions are:
•
Utility
– Single Line Telephone (analog port) or Door Phone.
•
Ring Type
– Ring (the only option available)
•
Ring Position
(Day) – When the port has been selected for Door Phone use,
this parameter assigns the Day Mode ringing destination whenever the Door
Phone Call Button is pressed. Ringing destinations can be extensions or Hunt
Groups.
•
Ring Position
(Night) – When the port has been selected for Door Phone
use, this parameter assigns the Night Mode ringing destination whenever the
Door Phone Call Button is pressed. Ringing destinations can be extensions or
Hunt Groups.
•
Maximum Ring Time
– Once the Door Phone Call Button is pressed, ringing
at the extensions/hunt groups will continue until this timer has elapsed. This
is provided to cancel ringing when the call goes unanswered.
•
Unlock code
– This code is used with a contact closure provided on the
Option Board. It is often used to trigger a solenoid-activated door lock
whereby the telephone user can open the door by dialing this code while con-
nected to the Door Phone.
•
Open Indication
– Open indication is the amount of time that a door phone
may remain connected once it places a call. Open indication can be limited
from 01-60 seconds. A setting of “00” removes the limit function.
•
Door Relay
— Use this setting to link any of the four available relay contacts
to this port. (When a Relay is associated to the port, the relay will operate
when the user dials the Unlock Code.)
Data Range (Default Range in Bold) “p” 1 or 2 (N/A) “o” =
Содержание 45P
