Xblue Networks 45P, Инструкция по установке и обслуживанию

Страница: 31 / 241

XBLUE Networks
31
Installation
Module Installation
4
Voice Processing System
1.
After Installing the Option Module. If not using an Option Module, use the speical spac-
ers that come with the Voice Processing System.
2.
Insert the brass-colored stand-off posts, which are supplied with the voice mail system.
3.
Remove the plastic protective cover from inside the KSU.
4.
Insert the Module, and plug the ribbon cable into the pin connector socket labeled “VM/
B”.
5.
Place the previously removed screws into the top of the stand-offs to secure the Mod-
ule.
6.
Replace the cover, and power the system up.
The fully integrated voice mail will be fully operational, within minutes of system being
powered up. Therefore, to maintain proper database integrity it is important to understand
the proper shutdown procedure.
1.
From any digital telephone enter
Feature
#0
2.
Followed by the attendant password (at Default the password is
9999
)
3.
Press
back
4.
The display will update
SHUT DOWN VM
5.
Press
show
6.
Press
go
7.
When the display returns to
SHUT DOWN VM
8.
The system can be safely powered down
System Grounding
A good earth ground is necessary to ensure proper operation of the system. Carefully
check that the system is connected to a reliable grounding path. Generally, the gauge of
the ground wire should directly correlate with the distance from the ground source (i.e., a
greater distance from the grounding source requires a larger gauge of grounding wire).
The ground wire should be connected to the ground lug located on the motherboard in the
cabinet. The distance of ground wire should be kept as short as possible.
Lightning Protection
It is good practice to protect all CO Lines and Extensions with proper lightning surge arres-
tors, such as gas discharge tubes, which guards against damaging surges caused by non-
direct lightning strikes. Failure to provide proper lightning protection may cause damage to
the system.