Xblue Networks 45P, Инструкция по установке и обслуживанию

Страница: 210 / 241

Voice Processing System
210
XBLUE Networks
7
4
Holiday Schedule
4
Holiday Schedule
Up to 100 holidays can be predefined in the voice processing system. Once a holiday is
defined, it will play a special Holiday Greeting, if it is recorded in the “Record Greetings”
section. If no holiday greeting is recorded the generic after hours greeting will be played.
The year, in 4 digit format, must be entered before each holiday.
•
1
Listen to current data - This will play all of the currently programmed
holidays in the order that they were entered.
•
2
Set the holiday dates - Enter the dates for each holiday in 4 digit for-
mat. For example, enter January 1 as 0101, then press # to save the entry.
5 = System Interface Codes
•
NOT USED AT THIS TIME
6 = Operator Operations
The Operator Operations parameters are referenced whenever a caller dials
0
while in
the voice processing system. There are three programmable parameters that can be cus-
tomized for each installation.
•
1
Operator extension regular hours - This parameter establishes the
extension that rings during office hours when a caller dials
0
. At default,
extension 10 is defined as the operator.
•
2
Operator extension after hours - This parameter establishes the exten-
sion that rings after hours when a caller dials
0
. At default, extension 10 is
defined as the operator.
•
3
Operator’s voice mailbox - The operator’s voice mailbox
0
can be
enabled or disabled. When disabled no messages can be recorded in mailbox
0. When enabled messages can be recorded.
Note:
Any number of digital telephones can be programmed with a flexible button to monitor
mailbox 0. When a message is left in mailbox 0, all extensions with a programmed button
will receive a flashing indication that a new message is in the mailbox. Unlike all other mail-
boxes, the Operator Mailbox does not require a password. The Message Waiting Indication
(LED and Status Bar) will be turned off at all extensions when the mailbox is accessed.
Use the following steps to program mailbox 0 button: