Xante FilmMaker 4, Руководство пользователя

Страница: 86 / 310

2-50 Macintosh Setup bb
You can preview a coordinate change’s effect on image placement. To do this, change the x and y
coordinates as desired; then, click View Coordinates. The + shifts accordingly on the screen page
and the original position appears as a gray + (fig. 2.105). This is only a preview; the change will
not take effect unless you click Update/Print.
Fig. 2.105 View Coordinates Window
f. Print another alignment page (see step 3).
g. Measure the -x and -y lines on the new test page. If the lines are not each
1" (25.4 mm) from the edge of the paper, go back to step 3c and repeat
the process.
4. Close your browser when the -x and -y lines are set correctly.
More X-ACT
Use XANTÉ’s patented X-ACT technology to calibrate printer line lengths to exact
dimensions. You can save a different set of More X-ACT values for each different
media type your printer supports.
You need a metric ruler to complete this procedure.