manualshive.com logo in svg

Xante FilmMaker 4, Руководство пользователя

Поделиться
Скачать
Xante FilmMaker 4 Скачать руководство пользователя страница 201

Configuration  4-5

For these options to be available, the Adobe PostScript printer driver and your
printer’s PPD must be installed and configured properly. See chapter 2 (Macintosh) or
3 (PC) for details.

Usually printer specific options in the PPD are accessed through the Device Options
tab (Windows 98 and Me), the Device Settings tab (Windows NT, 2000, and XP), and
the Printer Specific Options menu on a Macintosh.

Selecting PPD Options (Macintosh)

To configure a printer feature from the Print dialog box

1.

Install and configure the AdobePS printer driver and your printer’s PPD
following the instructions in chapter 2.

2.

Choose File: Print. The Print dialog box appears.

3.

Make sure your printer is selected in the Printer drop-down menu; then, click
General to display the list of options (fig. 4.2).

Fig. 4.2  Adobe Options Menu

Fig. 4.3  Printer Specific Options Menu

4.

Choose Printer Specific Options. The printer option menus appear (fig. 4.3).

5.

Use the right scroll bar to locate the option; then, use the option’s drop-down
menu to select its setting. Repeat to configure other printer options.

6.

Click Save Settings to save the Print dialog box settings as the defaults for all
jobs sent to the selected printer.

7.

Click Print to send the file to the printer.

Selecting PPD Options (Windows 98 and Me)

To configure a printer feature from the Print dialog box

1.

Install and configure the AdobePS printer driver and your printer’s PPD
following the instructions in chapter 3.

Содержание FilmMaker 4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды