manualshive.com logo in svg

Xante FilmMaker 4, Руководство пользователя

Поделиться
Скачать
Xante FilmMaker 4 Скачать руководство пользователя страница 261

Troubleshooting  8-3

WAITING

The printer is processing a job and waiting to receive more
data before printing.

WARMING UP

The printer is warming up.

Power and Setup Issues

This section provides tips for resolving problems concerning power to the printer and
host or concerning printer setup.

My printer has no power.

•

Make sure the power cord is plugged into the printer and the power source.
See “Connecting the Power Cord” in chapter 1.

•

Make sure the printer is turned on. See “Turning the Printer On” in
chapter 1.

•

Make sure the power source is grounded, working, and rated for 100 V, 15 A.

The printer has power but no start-up page prints.

•

Make sure the start-up page feature is enabled. See “Start-up Page” in
chapter 4.

•

Check the front panel window for a status message. See “Status Messages”
earlier in this chapter.

•

Make sure the toner cartridge is installed properly. See “Toner Cartridge”
in chapter 1.

•

Make sure there is media in the selected tray. If you are using a paper
cassette, make sure it is installed properly. See “Standard Cassette” and
“Multipurpose Feeder” in chapter 1.

My printer does not respond properly to my PC using a parallel connection.

•

Make sure all cables are connected and seated properly. See “Required
Equipment: Parallel” in chapter 1 and “Port Connections” in chapter 3.

•

Make sure the correct Adobe PostScript printer driver and your printer’s
PPD are installed and configured properly. See “Installing Adobe PostScript
Printer Drivers” in chapter 3.

•

Make sure the printer is online.

Содержание FilmMaker 4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды