manualshive.com logo in svg

Xante FilmMaker 4, Руководство пользователя

Поделиться
Скачать
Xante FilmMaker 4 Скачать руководство пользователя страница 157

PC Setup 3-45

Printer Configuration has six options: Informational Pages, Network, PostScript, Print
Quality, Reset Factory Defaults, Storage Devices, and Trays and Media (fig. 3.92).

Informational Pages (Start Page, Low Toner Page, and Network Page)

The Information Pages window allows you enable or disable printing of the start-up
page, the low toner page, and the Network Page.

1.

Go to the printer home page (fig. 3.93). See “Printer Home Page” earlier in this
chapter for details.

Fig. 3.93  Printer Home Page

Fig. 3.94  Informational Pages Window

2.

Select Printer Configuration: Informational Pages (fig. 3.93). The
Informational Pages window appears (fig. 3.94).

3.

Set start-up page, low toner page, and network page printing as desired (fig. 3.94).

a.

Start Page: Select either On to enable start-up page printing or select Off
to disable it. Then, click Change.

b.

Low Toner Page: Select either On to enable low toner page printing or
select Off to disable it. Then, click Change.

c.

Network Page: Select either On to enable low toner page printing or
select Off to disable it. Then, click Change.

4.

Close your browser.

You also can control start-up page printing using the Startpg.on and Startpg.off files
in on the XANTÉ Utilities CD-ROM. See “PS_Files Folder” earlier in this chapter for
details.

Network (EtherTalk, General, and TCP/IP Configuration)

The Network option allows you to control EtherTalk and TCP/IP configuration.

Содержание FilmMaker 4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды