manualshive.com logo in svg

Xante FilmMaker 4, Руководство пользователя

Поделиться
Скачать
Xante FilmMaker 4 Скачать руководство пользователя страница 22

1-6  Introduction and Installation

bb

Printer Location

Set up your printer in a location that can support its weight and can provide sufficient operation
and maintenance clearance. To prevent overheating, allow at least 8.0" (200 mm) clearance for
the printer’s vent.

Fig. 1.2  Location Guidelines

Printer Package

Unpack the printer, saving the packing materials.

1.

Remove the items packed on top of the printer.

The printer weighs approximately 58.5 lb (26.5 kg) without the toner, cassettes, and
media installed.
•  Always have two people lift the printer.
•  Only lift the printer using the recessed grip areas on the right and left sides.

Содержание FilmMaker 4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды