manualshive.com logo in svg

Xante FilmMaker 4, Руководство пользователя

Поделиться
Скачать
Xante FilmMaker 4 Скачать руководство пользователя страница 218

4-22  Configuration

Accurate Screens is active in the PPD only if the Enhanced Screens menu is set to
Normal.

Start-up Page

The Start-up Page feature prints a page that lists the selected resolution, installed
RAM, hard disk identities, page count, enabled interfaces, and network information
(if the Ethernet upgrade is installed) each time the printer is turned on.

Set Start-up Page from the Utility: Start Page configuration menu, from the browser
Informational Pages, or by downloading Adobe PostScript files to the printer.

In the front panel Utility: Start Page menu, On (the factory default) enables the
feature and Off disables it. In the browser utilities, Informational Pages allows you to
turn the Start-up Page feature on or off and Utilities Pages allow you to print this page
on demand.

XANTÉ Utilities CD-ROM contains the PostScript files Startpg.on and Startpg.off.
Download these files to the printer to enable (Startpgon.ps) or disable (Startpgoff.ps)
the feature. See “PS Files Folder” and “Using Adobe Downloader” in chapter 2
(Macintosh) and “PS_Files Folder” in chapter 3 (PC) for instructions.

To print a start-up page manually, take the printer off line and press the Test key. After
the page prints, press the Online key to put the printer back on line.

Toner Cartridge Control

If your printer does not produce the rich, black images that you expect, try
redistributing the toner in the cartridge and adjusting the print density before
replacing the toner cartridge.

Redistributing Toner

If you have not used the toner cartridge in several days, toner may have settled.
Remove the cartridge from the printer, and shake the cartridge gently to redistribute
toner. Replace the cartridge in the printer. See “Toner Cartridge” in chapter 1.

Adjusting Print Density

You can increase or decrease the amount of toner laid down by the printer using the
print density dial.

The amount of toner used increases as printer dial settings move from low (L) to high
(H). Printing with too high a setting shortens the life of the toner cartridge and may
degrade print quality.

Содержание FilmMaker 4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды