Xante FilmMaker 4, Руководство пользователя

Страница: 270 / 310

8-12 Troubleshooting bb ______________________________________________________
My printer is making funny noises.
• Make sure the printer is set up on a stable, level surface. See “Printer
Location” in chapter 1.
• Make sure the multipurpose feeder cover is closed firmly.
• Make sure all paper cassettes are seated properly. See “Standard Cassette”
in chapter 1.
• There may be a foreign object in the printer. Turn off the printer and
remove the object. See chapter 1 for the basic printer setup and chapter 7
for the optional paper feeder setup.
I can’t remove the paper cassette.
• Do not remove the cassette by force.
• Make sure you are using the proper procedure to remove the paper
cassette. See “Standard Cassette” in chapter 1.
• The cassette may be jammed. This can occur if the power switch is turned
off or the multipurpose feeder opened during printing. Turn off the printer
and wait a few seconds. Turn on the printer and wait for the Ready/Idle
message; then, try to remove the cassette.
Media Jams
This section contains suggestions for solving Media jams.
Preventing Jams
Use the following guidelines to prevent most media jams.
• Make sure the media is level and in an appropriate location. See “Printer
Location” in chapter 1.
• Make sure media meets the guidelines in “Media Specifications” in chapter 5.
• Make sure media is stored following the guidelines in “Media Specifications” in
chapter 5.
• Make sure media is loaded properly in the selected cassette or multipurpose
feeder.
- Make sure the correct size media is loaded in the selected cassette or
multipurpose feeder.