Xante FilmMaker 4, Руководство пользователя

Страница: 199 / 310

Configuration 4-3
TEST
Test key allows you to scroll back through options on a menu level when
using the configuration menus. To print a start-up page, take the printer off
line and press the Test key. Then, press the Online key.
MENU
Menu key allows you to enter the menu structure when Ready/Idle or
Offline appears in the window and to scroll forward through menus and
options.
ENTER
Enter key allows you to select the menu or option displayed in the window.
When you select an option, an asterisk appears next to the option name in
the window to indicate it is now the current setting.
See “Interface Control” later in this chapter for using the control keys to set the IP
address.
Configuration Menus
Use configuration menus to set printer features and interfaces defaults. This section
describes using the configuration menus. The Menu Layout option in the front panel
Utility: Print menu prints a sheet with the main configuration menu structure and
current option settings.
As you scroll through options in a menu, an asterisk appears next to the option that is
the current setting. If necessary or desirable, you can return to factory default settings
(see “Resetting to Factory Defaults” later in this chapter).
PPD options override printer default settings for a specific job or for all jobs sent to
the printer from your host.
Selecting Menu Options
The following example explains changing the printer’s default resolution from 2400 x 2400 dpi
to 600 x 600 dpi using control keys and configuration menus.
1. Make sure the printer is on and idle.
2. Press the Menu key until SETUP: GRAPHIC appears.
3. Press the Enter key to enter the Graphic menu.