Xante FilmMaker 4, Руководство пользователя

Страница: 154 / 310

3-42 PC Setup
PS_Files Folder
This folder contains Adobe PostScript files to help setup and maintain your printer.
They help in areas such as keeping track of your printer’s status, performing specific
functions, and printing fonts samples.
These files can be downloaded to your printer by typing the following DOS
command, substituting the appropriate file name and a different port, if necessary:
COPY FILENAME.PS LPT1
↵
Accelafont.ps allows you to set the percentage of ramdisk available for the Font
Accelerator feature.
D.ps contains a Control-D (PostScript’s end-of-job marker) for use with applications
that do not send a PostScript end-of-file.
Description.txt contains an overview of the files in the PS Files folder. This file can be
printed using Adobe Acrobat 3.0 or later.
DHCPOFF.PS allows you to disable the DHCP protocol.
DHCPON.PS allows you to enable the DHCP protocol.
Factory.ps allows you to reset the printer parameters to factory defaults.
Fonts.ps prints a list of Adobe PostScript 3 fonts resident on XANTÉ PostScript 3
printers.
Fontsamp.ps prints samples of Adobe PostScript 3 fonts resident on XANTÉ
PostScript 3 printers.
Initdsk.ps files are used to initialize hard disk installed in your printer.
A hard disk must be initialized before it can be used to store downloaded fonts.
Initializing a disk erases all information stored on that disk.
Netduplex.ps allows you to configure the network duplex setting to Auto, Full Duplex,
or Half Duplex.
Netpgoff.ps allows you to disable printing the network page which lists protocol
settings for EtherTalk, IP, IPP, and LPR as well as Ethernet physical settings.