WILLTEK 4400 Mobile Phone Tester Series, Руководство пользователя

Страница: 400 / 834

Appendix A SCPI Command Reference
Bluetooth commands
376
4460 GSM System Option and 4468 EDGE System Option Version 12.20
Bluetooth commands
The SCPI commands for the 4489 Bluetooth Connectivity Test Package can be
found in the Bluetooth Connectivity Test Products user’s guide, ordering number
M 292 018.
Signaling operation register group
This group of registers is 16 bits wide. Its main task is to deal with events related
to the signaling status. The signaling operations depend on the system option
and can be found in the :STATus:OPERation:SIGNalling group of commands (see
the respective EVENt command for the signaling system at hand).
The Result bit of this group of registers is forwarded to bit 8 of the general oper-
ation register group.
Common commands
The common commands are understood by all SCPI and IEEE 488.2 instruments.
Their purpose is to perform general tasks and to read or work with the registers
common to all SCPI instruments. The following common commands have been
implemented.
General common
commands
*CLS
*IDN?
Syntax
:*CLS
Parameters
There are no parameters.
Description
Resets the entire status reporting system:
–
The service register will be cleared (all bits will be set to
0
).
– The event status register will be cleared (all bits will be set to
0
).
– The error message queue will be emptied.
– All event-type registers will be cleared.
Query
There is no query form of this command available.
Syntax
:*IDN?
Parameters
There are no parameters.
Description
There is only a query form of this command available.