WILLTEK 4400 Mobile Phone Tester Series, Руководство пользователя

Страница: 305 / 834

Chapter 7 RAPID!
Commands
4460 GSM System Option and 4468 EDGE System Option Version 12.20
281
PRINT (OUTPUT)
Description
Sets the cursor to a new position on-screen. Any subse-
quent text output will start from that position.
Parameter
x
is counted in character positions rather than
in pixels; parameter
y
in screen lines. The values for
x
and
y
are dependent on the currently set font size.
However, the 4400 enables the user to scroll the screen
output.
For practical reasons,
x
should be kept below 50 and
y
below 25.
Examples IF (channelno > 2099) then LOCATE 24, 0
Print "Input out of range. " _
;"Please reenter."
(In case the channel number
entered by the user is out of range, a prompt will appear
in the ‘status line’ of this RAPID! program.)
Syntax
PRINT [ { [USING usestr$,] exp [ , | ;
|TAB(number);] } ]
or
OUTPUT [ { [USING usestr$,] exp [ , | ;
|TAB(number);] } ]
Parameters
exp
is a numeric or string expression,
usestr$
defines an output format for numeric data,
number
stands for an integer figure, forcing the next
exp
of the same
PRINT
or
OUTPUT
command to appear
on a specific position on-screen.
Description
Displays the specified expression(s) on-screen.
In case the separator is a comma (,), the expression fol-
lowing the current one will be displayed at the next tab-
ulator position.
In case the separator is a semicolon (;), the expression
following the current one will be displayed directly after
the previous one.
OUTPUT
is a 100% synonym for
PRINT
.
PRINT USING "a.b"
allows to format numeric output.
While
a
gives the total amount of digits to be used for
the output (including decimal places, the decimal point
and the sign),
b
specifies the number of decimal places
(see example below).
Note: The
PRINT
command is also available to output
data to a file or the SCPI system.