Whittemore Enterprises Inc. EAGLE TWO PLUS Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 109

background image

USER GUIDE |

EAGLE TWO+

Version: 3.3

108

1) Electro Surgery is proven in surgical applications over more than 60 yrs. If safety instructions

are not followed/ implemented, usage of this equipment in operation theatre can be hazardous.
Risk associated with the product/procedure cannot be denied, if not used as per „user & safety
instructions‟ provided in „User/ Instruction Manual‟.

2) The equipment has to be strictly used only by qualified, trained & licensed surgeon/physician.

3) Optimized & safe usage of equipment is warranted only if manufacturer‟s approved

accessories are used along with the equipment during surgery. Company will not be
responsible for any damage/injuries/complications caused to user or patient due to the use o f
unsafe, non-approved electrosurgical accessories.

4) Company is not responsible for any damage/ complications to patient or user due to use any

equipment which has not been maintained & calibrated periodically as described in
user/instruction manual.

5) The equipment maintenance has to be done by a Company trained & qualified

technician/engineer. Company is not responsible for any kind of losses to equipment/ patient/
user caused due to the incorrect operation/ maintenance of the equipment by an unauthorized/
untrained person.

6) Consumables/ accessories have to be used as per the instructions given in the accompanying

documents. Use of expired or re-used accessories beyond the lifecycle may lead to
injury/damage/complication to patient or user. Company will not be responsible for such
injury/damage/complications.

7) The equipment‟s warranty is in lieu of all other warranties, expressed or implied, including

without limitations, the warranties of merchantability and fitness for a particular purpose, and
of all other obligations or liabilities on the part of the Company. Company neither assumes nor
authorizes any other person to assume for any other liability in connection with the sale or use
of any of the Company products.

8) Notwithstanding any other provision herein or in any other document or communication,

Company‟s liability of products sold hereunder shall be limited to the aggregate purchase price
for the goods sold by Company to the customer. There are no warranties which extend beyond
the terms hereof. Company disclaims any liability hereunder or elsewhere in connection with
the sale of this product, for indirect or consequential damages.

Disclaimer

«
...
107
108
109

Содержание EAGLE TWO PLUS














































































































Отзывы:

Нет отзывов

Похожие инструкции для EAGLE TWO PLUS

Бренд: Keithley Страницы: 149

Бренд: Balanced Body Страницы: 4

Бренд: ParaBody Страницы: 5

Бренд: Sagola Страницы: 20

Бренд: Earmor Страницы: 5

Бренд: DAKO Страницы: 25

Бренд: 3M ESPE Страницы: 50

Бренд: VACGEN Страницы: 13

Бренд: Bahco Страницы: 9

Бренд: Garmin Страницы: 10

Бренд: Naviom Страницы: 31

Frontier FC5706

Бренд: OHAUS Страницы: 47

Бренд: Ocutech Страницы: 4

Бренд: Ocean Sonics Страницы: 45

Бренд: Vari Lite Страницы: 14

Бренд: Vaniman Страницы: 3

CardioCare EKG2000

Бренд: Bionet Страницы: 70

Egatronik 51249

Бренд: Ega Master Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды