WhitakerAudio J C Whitaker 20 W Stereo Audio Amplifier, Руководство пользователя

Страница: 182 / 194

182
WhitakerAudio
– Prepare a 3-ft piece of #16 red stranded wire. Attach a male connector on one end and a
female connector on the other end.
– Prepare two 3-ft pieces of #16 white stranded wire. Attach male connectors on one end
and female connectors on the other end.
– Prepare two 3-ft pieces of #16 green stranded wire. Attach male connectors on one end
and female connectors on the other end.
– Prepare two 3-ft pieces of #22 blue hookup wire. Attach male connectors on one end and
female connectors on the other end.
– Insert the male connectors into a matching housing as follows:
• Black wire to pin #1
• White wire to pin #2
• White wire to pin #3
• Red wire to pin #4
• Green wire to pin #5
• Green wire to pin #6
• Blue wire to pin #7
• Blue wire to pin #8
• Black wire to pin #9
– Loosely twist the two white wires together.
– Loosely twist the two green wires together.
– Loosely twist the two blue wires together.
– Cut a 3-ft length of expandable sleeving and place over the cable bundle. Cut two 3/4-inch
long pieces of heat-shrink tubing and place on each end of the sleeving. Process (heat) the
tubing closest to the connector socket. Caution: do not use too much heat as it can melt the
sleeving.
– Assemble the connector by screwing the housing onto the connector body. Install and
secure the cable clamp.