172
WhitakerAudio
For certain voltage amplifier types, this device included, the maximum permissible screen
grid input varies with the screen grid voltage, as shown in Figure 10.2. Full rated screen grid input
is permissible at screen grid voltages up to 50 percent of the maximum rated screen grid supply
voltage. From the 50 percent point to the full rated value of supply voltage, the screen grid input
must be decreased. The decrease in allowable screen grid input follows a curve of the parabolic
form. The rating chart is useful for applications utilizing either a fixed screen grid voltage or a
series screen grid voltage-dropping resistor; specifically:
•
When a fixed voltage is used, it is necessary only to determine that the screen grid input is
within the boundary of the operating area on the chart at the selected value of screen grid volt-
age to be used.
Plate to cathode, heater, grid #2, grid #3, internal shield
2.6 pF
Direct interelectrode capacitance (approx.), other
Triode cathode to heater
3 pF
Pentode cathode, pentode grid #2, internal shield
3 pF
Pentode grid #1 to triode plate
0.2 pF max.
Pentode plate to triode plate
0.1 pF max.
Class A
1
Amplifier, Maximum Ratings (Design-Maximum Values)
Triode Unit
Pentode Unit
Plate voltage
330 V
330 V
Grid #2 (screen grid) voltage
Figure 10.2
Grid #2 (screen grid) supply voltage
330 V
Grid #1 (control grid) voltage, positive bias value
0 V
0 V
Plate dissipation
2.5 W
3 W
Grid #2 (screen grid) input
For grid # 2 voltages up to 165V
0.55 W
For grid #2 voltages between 165 and 330V
Figure 10.2
Characteristics
Plate supply voltage
125 V
125 V
Grid #2 (screen grid) supply voltage
110 V
Grid #1 (control grid) voltage
–1 V
–1 V
Amplification factor
40
—
Plate resistance (approx.).
—
200 k
Ω
Transconductance
7500 μmhos
5000 μmhos
Plate current
13.5 mA
9.5 mA
Grid #2 (screen grid) current
3.5 mA
Grid #1 voltage (approx.) for plate current of 20 μA
–9 V
–8 V
Table 10.1
Key Parameters of the 6U8A
Содержание J C Whitaker 20 W Stereo Audio Amplifier
