WhitakerAudio 60 W Stereo Power Amplifier, Руководство пользователя и по сборке

Страница: 130 / 154

130
WhitakerAudio
– Prepare a 3-ft piece of #16 red stranded wire. Attach a male connector on one end and a
female connector on the other end.
– Prepare two 3-ft pieces of #16 white stranded wire. Attach male connectors on one end
and female connectors on the other end.
– Prepare two 3-ft pieces of #16 green stranded wire. Attach male connectors on one end
and female connectors on the other end.
– Insert the male connectors into a matching housing as follows:
• Black wire to pin #1
• White wire to pin #2
• White wire to pin #3
• Red wire to pin #4
• Green wire to pin #5
• Green wire to pin #6
• Black wire to pin #9
Note that pin #7 and pin #8 are not used.
– Loosely twist the two white wires together.
– Loosely twist the two green wires together.
– Cut a 3-ft length of expandable sleeving and place over the cable bundle. Cut two 3/4-inch
long pieces of heat-shrink tubing and place on each end of the sleeving. Process (heat) the
tubing closest to the connector socket. Caution: do not use too much heat as it can melt the
sleeving.
– Assemble the connector by screwing the housing onto the connector body. Install and
secure the cable clamp.
– Slide the housing for the female connector on to the cable. Be sure to properly orient the
housing with respect to the connector.
Using an ohmmeter, identify the black wire inserted in the pin #1 position on the male
connector. This wire should be connected to pin #1 on the female connector. For the white wire
pair and the green wire pair, an exact match between the connectors is not necessary.