WhitakerAudio 60 W Stereo Power Amplifier, Руководство пользователя и по сборке

Страница: 29 / 154

29
60 W Stereo Power Amplifier
5 Step-by-Step Instructions
The following steps are recommended for assembly of the 60 W stereo amplifier. As each step is
completed, check it off the list. The project is divided into four major elements—assembly of the
right channel PWB, assembly of the left channel PWB, assembly of the power supply PWB, and
assembly of the chassis. Builders are encouraged to follow the specific instructions provided in
the following sections.
An examination of the shipping box will show that the right channel and left channel parts are
contained in separate boxes, as is the power supply PWB components. It is recommended that
only one set of components be opened at a time as this will reduce the possibility of component
mix-ups.
Each section heading that follows marks a logical start/stop point in construction of the
amplifier. Do not rush through the project; instead, consider setting modest goals for progress
over a period of some days. A more relaxed pace often results in a better end-product, and a more
enjoyable overall experience.
Organize a work space that provides ample room and light. The following tools are minimally
required for assembly:
• Common screwdriver
• Phillips screwdriver
• Wire cutters
• Pliers
• Long-noise pliers
• Solderless terminal crimp tool
• 25–35 W soldering iron
• Solder
• Heat-shrink gun is recommended, although not strictly required.
While there are certainly a number of approaches to building a vacuum tube product, the
following procedure has proven to be efficient and repeatable.