WEG CFW-11W G2 RB Series, Руководство пользователя

Страница: 69 / 107

HMI
4-4 | CFW-11W G2
4
4.2 PARAMETER STRUCTURE
When the right soft key is pressed in the monitoring mode (“MENU”), the first four parameter groups are shown on
the display. The parameter group structure is shown in
Table 4.1 on page 4-4 . For further details on the existing
groups in the software version in use, refer to the programming manual.
Table 4.1: Parameter groups
Level 0 Level 1 Level 2 Level 3
Monitoring 00 ALL PARAMETERS
01 PARAMETER GROUPS
20 Ramps
21 Speed Reference
22 Speed Limits
23 V/f Control
24 Adj. V/F Curve
25 V V W Control
26 V/f Current Limit V/f
27 V/f DC Link Limit
28 Dynamic Braking
29 Vector Control
90 Speed Regulator
91 Current Regulator
92 Flux Regulator
93 I/F Control
94 Self-Tuning
95 Torque Curr. Lim.
96 DC Link Regulator
30 HMI
31 Local Command
32 Remote Command
33 3-Wire Command
34 Forward/Reverse
Command
35 Zero Speed Logic
36 Multispeed
37 Electronic Potent.
38 Analog Inputs
39 Analog Outputs
40 Digital Inputs
41 Digital Outputs
42 Inverter Data
43 Motor Data
44 FlyStart/RideThru
45 Protections
46 PID Regulator
47 DC braking
48 Skip Speed
49 Communication
110 Local/Rem Config.
111 Status/Commands
112 CANopen/DeviceNet
113 Serial RS232/485
114 Anybus
115 Profibus DP
50 SoftPLC
51 PLC
52 Trace Function
02 ORIENTED START-UP
03 CHANGED PARAM.
04 BASIC APPLICATION
05 SELF-TUNING
06 BACKUP PARAMETERS
07 I/O CONFIGURATION
38 Analog Inputs
39 Analog Outputs
40 Digital Inputs
41 Digital Outputs
08 FAULT HISTORY
09 READING PARAMETERS