WEG CFW-11W G2 RB Series, Руководство пользователя

Страница: 68 / 107

HMI
CFW-11W G2 | 4-3
4
Installation:
The HMI can be installed or removed with the inverter energized or not.
Whenever the inverter is energized, the display goes to the monitoring mode. For the factory setting, a screen
similar to
Figure 4.3 on page 4-3 (a) will be shown. By setting proper parameters, other variables can be shown
in the monitoring mode or the content of the parameters can be presented as bar graphs or larger characters as
shown in
Figure 4.3 on page 4-3 (b) and (c).
Run LOC 1800rpm
12:35 Menu
1800 rpm
1.0 A
60.0 Hz
Inverter status:
- Run
- Ready
- Config
- Self-tuning
- Last fault: FXXX
- Last alarm: AXXX
- etc.
Indication of the direction
of rotation of the motor.
Indication of the
control mode:
- LOC: local mode.
- REM: remote mode.
Indication of the motor
speed in rpm.
Monitoring parameters:
- Motor speed in rpm.
- Motor current in Amps.
- Output frequency in Hz (default).
P0205, P0206, and P0207: selection of
parameters that will be displayed in the
monitoring mode.
P0208 to P0212: engineering unit for the speed
indication.
Right soft key feature.
Clock.
Settings via:
P0197, P0198, and P0199.
Left soft key feature.
(a) Monitoring screen with the factory default settings
Run
LOC
1800rpm
12:35 Menu
rpm
A
Hz
Monitoring parameters:
- Motor speed in rpm.
- Motor current in Amps.
- Output frequency in Hz (default).
P0205, P0206, and P0207: selection of parameters
that will be displayed in the monitoring mode.
P0208 to P0212: engineering unit for the speed
indication.
100%
10%
100%
(b) Example of a monitoring screen with bar ghaphs
Run
LOC
1800rpm
12:35 Menu
1800
Value of one of the parameters defined in P0205,
P0206 or P0207 displayed with a larger font size.
Set parameters P0205, P0206 or P0207 to 0 if it is not
desirable to display them.
rpm
(c) Example of a monitoring screen displaying a parameter with a larger font size
Figure 4.3:
(a) to (c) Monitoring modes of the HMI display