WAGO I/O SYSTEM 750 Скачать руководство пользователя | Manualshive

Страница: 87 / 260

background image

WAGO I/O System 750

Mounting

87

750-8210/040-000 PFC200; G2; 4ETH; XTR

Manual

Version 1.7.0, valid from FW Version 04.01.10(23)

6.5

Mounting Sequence

Fieldbus couplers, controllers and I/O modules of the WAGO I/O System 750 are
snapped directly on a carrier rail in accordance with the European standard EN
60175 (DIN 35).

The reliable positioning and connection is made using a tongue and groove
system. Due to the automatic locking, the individual devices are securely seated
on the rail after installation.

Starting with the fieldbus coupler or controller, the I/O modules are mounted
adjacent to each other according to the project design. Errors in the design of the
node in terms of the potential groups (connection via the power contacts) are
recognized, as the I/O modules with power contacts (blade contacts) cannot be
linked to I/O modules with fewer power contacts.

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent
injury. Do not touch the blade contacts.

Insert I/O modules only from the proper direction!

All I/O modules feature grooves for power jumper contacts on the right side. For
some I/O modules, the grooves are closed on the top. Therefore, I/O modules
featuring a power jumper contact on the left side cannot be snapped from the
top. This mechanical coding helps to avoid configuration errors, which may
destroy the I/O modules. Therefore, insert I/O modules only from the right and
from the top.

Don't forget the bus end module!

Always plug a bus end module 750-600/040-00x onto the end of the fieldbus
node! You must always use this bus end module at all fieldbus nodes with the
WAGO I/O System 750 XTR fieldbus couplers/controllers to guarantee proper
data transfer.

Increased interference!

For standard-compliant application in substation instrumentation and control,
telecontrol systems, railway technology or shipbuilding certified operation,
field-side power supply filter 750-624/040-001 or power supply filter
750-626/040-000 are generally to be used for XTR module groups.

«
...
85
86
87
88
89
...
»

Содержание I/O SYSTEM 750





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для I/O SYSTEM 750

Бренд: Habegger Страницы: 2

Бренд: S.E.M. Страницы: 6

Torque Master Plus 9100

Бренд: Wayne-Dalton Страницы: 44

Бренд: CAME BPT Страницы: 16

Бренд: Naya Страницы: 11

Бренд: Vansco Страницы: 11

Бренд: Faraone Страницы: 68

Бренд: LAON TECHNOLOGY Страницы: 40

Safeline DNSL-IO2

Бренд: DINA Страницы: 28

Бренд: Telpro Страницы: 6

Бренд: Xantech Страницы: 4

Бренд: BEG Страницы: 216

ShoreStation SSPV30120MS

Бренд: Midwest Industries Страницы: 17

Бренд: ICP DAS USA Страницы: 8

Бренд: FISCHER Страницы: 100

Бренд: Redback Страницы: 16

ePowerSwitch 8 Master

Бренд: Neol Страницы: 2

HydroTap G4 802701

Бренд: Zip Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды