124 Appendix
WAGO I/O System 750 XTR
750-495/040-010 3-Phase POM 20KV 300A XTR
Manual
Version 1.0.0
Table 69: Parameter 36
Parameter 36 – Observation Interval, Arithmetic Mean Value, Phase 3
Function
Data Type Access
Factory Setting
Observation interval, arithm. Mean value, phase
3
UINT
R/W
0x0004
0:
The arithmetic mean is calculated over 5 seconds
1:
The arithmetic mean is calculated over 10 seconds
2:
The arithmetic mean is calculated over 15 seconds
3:
The arithmetic mean is calculated over 30 seconds
4:
The arithmetic mean is calculated over 60 seconds
5:
The arithmetic mean is calculated over 300 seconds
6:
The arithmetic mean is calculated over 480 seconds
7:
The arithmetic mean is calculated over 600 seconds
8:
The arithmetic mean is calculated over 900 seconds
≥ 9:
-reserved-
Table 70: Parameter 37
Parameter 37 – Interval, Autom. Reset Min/Max Values, Phase 1
Function
Data Type Access
Factory Setting
Time constant for automatic deletion of minimum
and maximum values of phase 1, resolution 200
ms,
activation via register 32, bit 8 required
UINT
R/W
0x000A (2 s)
Table 71: Parameter 38
Parameter 38 – Interval, Autom. Reset Min/Max Values, Phase 2
Function
Data Type Access
Factory Setting
Time constant for automatic deletion of minimum
and maximum values of phase 2, resolution 200
ms,
activation via register 32, bit 9 required
UINT
R/W
0x000A (2 s)
Table 72: Parameter 39
Parameter 39 – Interval, Autom. Reset Min/Max Values, Phase 3
Function
Data Type Access
Factory Setting
Time constant for automatic deletion of minimum
and maximum values of phase 3, resolution 200
ms,
activation via register 32, bit 10 required
UINT
R/W
0x000A (2 s)
