Wacker Neuson E3000, Руководство оператора

Страница: 17 / 214

E 3000 Safety Information
wc_si000579gb.fm
17
Before
operating the
genset
„
Know how to start, operate, and stop the genset before starting it.
„
Obtain the proper training for operating the genset. Do not allow untrained
personnel to operate or service the genset.
„
Check the fuel lines and the fuel tank for leaks and cracks before starting the
engine.
„
Clean the genset of any spilled fuel.
Running the
genset
„
Do not start the engine if fuel has spilled or a fuel odor is present.
„
Keep the area around the exhaust pipe free of flammable materials.
„
Do not smoke while operating the genset.
„
Keep sparks, flames, electrical arcs, and other sources of ignition far away from
the genset.
„
Do not touch the engine or muffler while the engine is running or immediately
after it has been turned off.
„
Do not operate the genset with the maintenance covers off.
„
Do not overload the genset. The total amperage of the tools and equipment
attached to the genset must not exceed the load rating of the genset.
„
Do not operate the genset with wet hands.
„
Do not remove the radiator cap when the genset is running or is hot.
Refueling
safety When adding fuel to the fuel tank:
„
Do not smoke.
„
Do not refuel a hot or running engine.
When adding fuel to the fuel tank:
„
Keep sparks, flames, electrical arcs, and other sources of ignition far away from
the genset.
„
Refill the fuel tank only in a well-ventilated area.
„
Reinstall the fuel tank cap after refueling.
Maintenance
safety
„
Only a trained technician should attempt to repair the genset.
„
Test procedures which require that the generator be running must be performed
using extreme caution.
„
Make sure clothing and shoes are dry, stand on a dry wooden platform or rubber
insulating mat, and use tools with insulated handles when servicing the genset.
„
Engine antifreeze is toxic to humans and animals. Clean up spills and dispose
of used engine antifreeze in accordance with local environmental regulations.
„
Make sure all fasteners are secure and torqued properly.