ECU converter JetCat Version: 1.0
Page 4/38
1
Hardware
Data LED: green (ON)
→
Receiving data from JetCat ECU
green (flashing)
→
Receiving data from JetCat ECU
and
data transfer to receiver
(Jeti only then, if JetiBox buttons are activated)
red (ON)
→
Data exchange with JetCat GSU (via Programming adapter)
The blue LED is blinking every second to signal the normal function of the ECU Converter.
The Micro SD card slot is used for updates.
The attachment of the VSpeak ECU converter in the model can be done with velcro tape, double
sided tape or cable ties.
1.1
Connection Telemetry port
With the servo patch cable included in the delivery, the Telemetry port of the VSpeak ECU
converter is connected to the telemetry input of the respective receiver.
1.2
Connection Data port
With the Western patch cable included in the delivery, the Data port of the VSpeak ECU
converter is connected with the JetCat ECU or I/O board. The VSpeak ECU Converter can be
connected wherever the JetCat GSU is connected. With the help of a Y-connector
(eg from reichelt.de, see chapter 4), a "parallel operation" of JetCat GSU and VSpeak converter
is also possible.
Micro SD card slot
Data LED green/red
Data Port
blue LED
Telemetry-
port
