ECU converter JetCat Version: 1.0
Page 35/38
2.7.1
Turbinestatus – numerical "Current"-Values
The turbines status messages are displayed as numerical "Current" values. The assignment is
given in the following table:
F-AKKU A
Description
0.00 A
OFF
1.00 A
Slow Down
2.00 A
AutoOff
3.00 A
WAIT for RPM (Stby/Start)
4.00 A
PreHeat1 (only for direct Kerosene startup mode)
5.00 A
PreHeat2 (only for direct Kerosene startup mode)
6.00 A
Ignite
7.00 A
Accleleration delay
8.00 A
MainFStrt (only for direct Kerosene startup mode)
9.00 A
Keros.FullOn (only for direct Kerosene startup mode)
10.00 A
Accelerate
11.00 A
Stabilise
12.00 A
Learn LO
13.00 A
Run (reg.)
14.00 A
SpeedReg (Speed Ctrl)
15.00 A
Two-Shaft-Regulate (only for turbines with secondary shaft)
100.0 A
all turbine shutdowns, except:
- RC-Off
- Auto-Off
- Manual-Off
111.0 A
like 100.0A, but only once for 2 seconds, e.g. for sum alarm
If in the transmitter an alarm thresold for the current of e.g. more than 105.0A is set, all turbine
shutdowns except for "RC-Off", "Auto-Off" and "Manual -Off" are signaled as a current alarm
for a period of 2 seconds.