VSpeak ECU Converter, Руководство пользователя, Страница: 37 / 38

ECU converter JetCat Version: 1.0 www.VSpeak-modell.de
Page 37/38
3 Update
The processor on the ECU Converter contains a SD bootloader with a version counter.
If firmware updates are available they will be sent via mail. The data-files attached to the
e-mail have to be copied to the Micro SD card (formatted FAT or FAT16), this card has to be
inserted into the ECU Converter and the power has to be switched on. The boot loader will
recognize the new software version and will install it (blue LED "flickers") and is then
up to date .
4 Accessories
4.1 Telemetry patch cable
A 3-pin servo patch cable is included in the delivery for connecting the ECU converter telemetry
port to the telemetry input of the respective receiver.
4.2 Data patch cable
A 6-pin patch cable is included in the delivery for connecting the ECU converter data port to
the JetCat ECU (or IO-Port) or with the Programming adapter.
4.3 Programming adapter
The VSpeak ECU converter
can be programmed using the
Programming adapter and the
JetCat GSU (setting the remote
control
system, alarm
thresholds, etc.).
The Programming adapter is the power supply of the GSU and the VSpeak converter from
a 2-3 cell LiPo / LiFe / LiIo battery (for example receiver or turbine battery).
The LED indicates that 5V supply voltage is available for the GSU and converter.
The programming adapter is
NOT included in the scope of delivery , as it is not required for
the systems Jeti and HoTT.
4.4 Micro SD card
For the installation of updates, a Micro-SD card is needed. The Micro SD card is NOT included
in the scope of delivery
You can obtain a matching card at www.vspeak-modell.de .
4.5 Western cable connector
Western cable connector available at www.reichelt.de: WB 2X6-6
4.6 Y Western cable connector
VSpeak ECU Converter and JetCat GSU can be operated "parallel". For
this, a "Y-Western socket" is available at
www.reichelt.de: WB 3X6-6
5 Instructions for disposal
Equipment marked with the symbol should not be disposed of within household
waste.
LED (5V ok)