VMware 4817V62 - vSphere - PC, Руководство администратора

Страница: 83 / 364

4 In the confirmation dialog that appears, click Yes to remove the managed host.
vCenter Server removes the managed host and associated virtual machines from the vCenter Server
environment. vCenter Server then returns the status of all associated processor and migration licenses to
available.
Monitoring Host Health Status
You can use the vSphere Client to monitor the state of host hardware components, such as CPU processors,
memory, fans, and other components.
The host health monitoring tool allows you to monitor the health of a variety of host hardware components
including:
n
CPU processors
n
Memory
n
Fans
n
Temperature
n
Voltage
n
Power
n
Network
n
Battery
n
Storage
n
Cable/Interconnect
n
Software components
n
Watchdog
n
Other
The host health monitoring tool presents data gathered using Systems Management Architecture for Server
Hardware (SMASH) profiles. The information displayed depends on the sensors available on your server
hardware.
You can monitor a host’s health status either by connecting the vSphere Client directly to a host, or by
connecting to a vCenter Server system. You can also set alarms to trigger when the host health status changes.
Monitor Host Health Status When Connected Directly to a Host
When you connect the vSphere Client directly to a host, you can view the health status from the host’s
Configuration tab.
When you are connected to a host through vCenter Server, you must use the Hardware Status tab rather than
the Configuration tab to monitor the host health.
If a component is functioning normally, the status indicator is green. The status indicator changes to yellow
or red if a system component violates a performance threshold or is not functioning properly. Generally, a
yellow indicator signifies degraded performance. A red indicator signifies that a component stopped operating
or exceeded the highest threshold.
The Reading column displays the current values for the sensors. For instance, the column displays rotations
per minute (RPM) for fans and degrees Celsius for temperature.
Procedure
1 Log in to the host using the vSphere Client, and select the host in the inventory.
Chapter 7 Managing Hosts in vCenter Server
VMware, Inc. 83